logo
post

Industrial Sliding Doors: Steel and Fire Sliding Doors Explained

Industrial Sliding Doors: Steel and Fire Sliding Doors Explained

Some openings are simply too wide, or too busy, for a hinged door. A leaf several metres across cannot swing through an aisle full of forklifts. Industrial sliding doors solve that by moving sideways along the wall, so the full opening is clear and nothing projects into the traffic route.

When a sliding door is the right choice

  • Wide or tall openings between warehouse bays, production halls and loading areas.
  • Places where a swinging leaf would block a corridor, a vehicle route or stored goods.
  • Fire compartment walls with large openings that must stay open in normal use.
  • Service and plant areas where equipment needs occasional wide access.

The trade-off is wall space: the leaf needs a clear length of wall beside the opening to slide onto, free of racking, pipes and switchgear.

How steel sliding doors are built

Steel sliding doors are made as rigid steel panels, single or in several sections for large sizes. The leaf hangs from rollers running on an overhead track fixed to the wall or structure, and a guide at floor level keeps the bottom in line without a raised rail across the opening. Leaves can slide one way, or part in the middle as a bi-parting pair. A pass door can be built into the leaf so people do not have to open the whole door.

How fire sliding doors work

Fire sliding doors are normally held open so the opening can be used freely. When the fire alarm operates, or a heat-sensitive link releases, the hold-open lets go and the door closes by itself, typically driven by a counterweight or an inclined track. The points to get right are:

  • The rating is for the assembly. Leaf, track, guides, seals and closing gear are tested together. Ask for evidence that covers your size and configuration.
  • Controlled closing. The closing speed is governed so the door does not become a hazard to people passing through.
  • Clear path. Nothing may be stored where the door travels. A blocked fire sliding door is one of the most common faults found on inspection.
  • Escape. Where the opening is on an escape route, the design must still allow people out, for example through a pass door.

What to specify

  • Clear opening width and height, and the wall space available on each side.
  • Fire rating, if the wall is a compartment wall.
  • Manual or powered operation, and how often the door will move.
  • Single slide or bi-parting; pass door and vision panels.
  • Wall and lintel construction, since the track carries the full weight of the leaf.
  • Finish suited to the environment.

Maintenance

Keep the track and guides clean, check rollers and stops, and test the automatic closing of fire sliding doors regularly so you know they will close when needed.

Frequently asked questions

Sliding door, sectional door or rolling shutter?

Sliding doors suit internal openings and fire walls with side room. Sectional doors and shutters suit external openings where there is headroom but no side room. A sectional door seals best on loading bays, and a rolling shutter supplier can advise on security openings.

Can a sliding door be fire rated and still be used every day?

Yes. That is what the hold-open and automatic closing arrangement is for.

How large can a sliding door be?

Large leaves are made in sections. The practical limit depends on the structure, the rating required and the manufacturer’s tested range.

See Vulcan’s fire sliding doors, and for the largest acoustic openings, elephant doors.

Talk to Vulcan about your project

Have a wide opening to close? Send us your requirement with the opening sizes, drawings or a door schedule, and our team will come back with a suitable configuration and quotation. You can also call +971 6 743 6665 or WhatsApp +971 55 608 8487.

Share:

About Author

logo-red-black

Vulcan Industries LLC specializes in designing and making fire-rated and security doors. We focus on growing markets and consistently deliver top-quality products that exceed expectations. From consultation to installation, we provide seamless service. Our doors are made from carefully chosen materials and meet strict quality standards. We prioritize excellent customer support, ensuring satisfaction every step of the way.