logo
post

Panic Bars, Vertical Rod Exit Devices and Door Furniture: Choosing Exit and Operating Hardware

Panic Bars, Vertical Rod Exit Devices and Door Furniture: Choosing Exit and Operating Hardware

Door hardware is specified item by item on a schedule, and it is easy to treat it as a list of part numbers. It works better to start from how each door is used: who opens it, in which direction, how often, and whether it is on an escape route or a fire compartment line. This guide matches the common items to those situations.

Panic bars and panic exit devices

Panic bars release the door when someone pushes a horizontal bar in the direction of escape. No key, no handle to turn, no knowledge of the building needed. They belong on escape doors used by the public or by large numbers of people: assembly halls, malls, schools, hospitals, stair and final exit doors. From outside, access is provided by a lever trim or a cylinder, so the door can stay locked against entry while remaining free to exit.

Vertical rod exit devices

A standard panic device latches at the door edge into the frame. Vertical rod exit devices latch at the top of the leaf, and usually the bottom as well, by rods running up and down from the bar. They are used on pairs of doors without a centre mullion, where there is no fixed frame member for an edge latch to engage, and on single doors where top and bottom latching is wanted. On a pair of escape doors, both leaves can then be opened independently with one push.

Lever door handles

Lever door handles operate the latch of a mortise lock and are the everyday choice for offices, rooms and service doors. Check that the lever suits the door thickness and the lock, that it returns fully to horizontal under its own springing, and that the shape is easy to use for everyone. On fire doors, the lever, lock and fixings must be compatible with the door’s certification.

Stainless steel pull handles and door push plates

Doors that do not latch, such as corridor cross-doors on closers, kitchen and washroom doors, are operated by a pull handle on one face and a push plate on the other. Stainless steel pull handles are fixed back to back through the door, bolt-through, or on concealed fixings. Door push plates protect the door face where hands land and tell users which way the door opens. Stainless steel is chosen because it tolerates constant handling and cleaning; choose the grade to suit the environment.

Door flush bolts

On a pair of doors, one leaf is normally used and the other stays shut until a wide opening is needed. Door flush bolts are recessed into the edge of that inactive leaf and shoot into the head of the frame and into a socket in the floor. A dust excluding socket keeps the floor hole from filling with debris. One caution: manual flush bolts are not suitable where the inactive leaf forms part of an escape route, because people cannot be expected to find and release them in an emergency. There, use automatic flush bolts or vertical rod exit devices.

Matching hardware to fire doors

  • Use hardware that is tested or listed for use on fire doors of that rating and material.
  • Keep to the preparations the door manufacturer allows. Extra holes cut on site can invalidate the rating.
  • Every fire door needs a self-closing device, and it must latch where the design requires it.

Frequently asked questions

What is the difference between a panic bar and a push pad?

A panic bar spans the door width and is intended for buildings used by the public. A push pad is a smaller device for trained occupants in places such as offices and plant areas. The fire strategy decides which is acceptable.

Can panic bars be fitted to existing doors?

Often, but on a certified fire door check with the manufacturer that the device and its preparation are permitted.

Do push plates and pull handles affect a fire rating?

Surface-fixed items generally have little effect, but fixings and any through-bolting should follow the door manufacturer’s guidance.

See Vulcan’s exit devices, lever handles, pull handles and push plates and flush bolts and sockets, all part of the architectural hardware range. For closers, read the door closer selection guide.

Talk to Vulcan about your project

Need a hardware schedule priced or reviewed? Send us your requirement with the opening sizes, drawings or a door schedule, and our team will come back with a suitable configuration and quotation. You can also call +971 6 743 6665 or WhatsApp +971 55 608 8487.

Share:

About Author

logo-red-black

Vulcan Industries LLC specializes in designing and making fire-rated and security doors. We focus on growing markets and consistently deliver top-quality products that exceed expectations. From consultation to installation, we provide seamless service. Our doors are made from carefully chosen materials and meet strict quality standards. We prioritize excellent customer support, ensuring satisfaction every step of the way.